Waxing Products
DESCRIPTION: The combination of different natural waxes
and oils makes it a very unique product for sealing surfaces. It is
made from renewable materials like plant oil and waxes, which are
well known to the trade. A natural and non toxic ingredient makes
it also gentle to the climate and resources. It is a transparent,
matt-finished sealing wax without synthetic additives BIO waxes
seal the pores and form a durable, anti-static surface that repels
water and dirt. For use on all types of wood surfaces as an
alternative to lacquer or varnish, especially on new and antique
furniture, toys, shelves etc. BIO Hard Floor Wax may be used on all
types of timber floor surfaces, stone, tile or slate. Not
recommended for use where moisture or condensation occur.
PREPARATION: Do not apply coatings to unseasoned or wet
timber. Wood should be well sanded, dry and cleaned of greasy, waxy
and dirty contaminants using . Hardwoods and timbers rich in
natural oils, waxes, acids and terpenes should be degreased using
Bio Thinner, because these substances may mix with the varnish and
prolong its drying time. Imperfect coats may require complete
stripping before applying BIO Products.
APPLICATION: BIO Antique Wax and BIO Hard Floor Wax are
ready-to-use. It might be helpful especially during cold weather to
soften the wax by standing the container in a 60 +C water-bath.
Apply thinly and evenly with a lint free cloth or brush, working
the wax well into the grain. Thick coats may cause white streaks.
Polish after 3-5 hours. Do not leave until completely dry as
buffing is then very difficult. On stone, tile or slate thin BIO
Hard Floor Wax with 50% of BIO Thinner. Depending on wear and tear,
apply a new thin coat of wax every 4 to 6 months. Provide adequate
ventilation during application and drying.
No comments:
Post a Comment